To recharge the headset, place it into the Headset Docking Cradle (12) in the base unit. Soon after hearing this warning, you should recharge the headset. When the headset battery is running low (approximately 5 minutes talk time remaining), an audible warning will be heard through the headset as a single beep repeating every 10 seconds. If using a Plantronics Handset Lifter the handset will be replaced and the call terminated. If you remain out of range for more than 15 minutes the system will drop the call permanently. On hearing this alert you should walk closer to the base unit to ensure call quality is maintained. When in Headset mode a warning alert of two beeps will sound in the headset shortly before you meet the range limit. In Handset mode the telephone can be used to make and receive calls in the normal way.Īs you walk away from the base unit you will eventually reach the system operating range limit. PLACING AND RECEIVING A CALL USING THE HANDSET Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section “Receiving a call using the lifter” on page 9. When the call is complete, return the telephone handset to the cradle. You will then be able to talk through your headset. Ensure that your CS50 Wireless Headset System is already in Headset mode. When your telephone rings take the handset off the hook. Note: If you have installed a Plantronics Handset Lifter (17) please refer to the section “Making a call using the Lifter” on page 9. You can achieve this by pressing the Talk Button (20) immediately on conclusion of the call. Tip: By selecting Handset mode after completing your call, you will conserve the headset battery power and extend the remaining available talktime. Take the handset off the hook and dial in the normal way. To place a call using the headset, the system must be in Headset mode. Both of the indicators are extinguished when in Handset mode. The Talk Indicator (15) on the base unit will illuminate and the On-Line Indicator (23) on the headset will flash when in Headset mode. Pressing the Talk Button (20) on the Headset selects Headset mode. Please install the CS50 Wireless Headset System in accordance with the instructions detailed in the Quick Start Guide.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |